Home • Foundation Repair • Basement Waterproofing • Concrete Leveling • About Pro Foundation Tech • Contact Pro Foundation Tech


	Foundation Repair Foundation Piers Carbon Fiber Wall Repair Wall Straightening Wall Bracing Light Structure Raising Water Management Basement Waterproofing Subsurface Geocomposite Drainage System Crack Injection Saber Water Well / Sump Pump Pit Radon Solutions Concrete Repair Concrete Leveling / Mudjacking / Pressure Grouting High Density Polyurethane Concrete Leveling Stained Concrete Concrete Polishing Epoxy Coatings Concrete Floor Prep New Construction Company Info About Us Testimonials Company F.A.Q. Contact Us Privacy Notice Financing Information Customer Survey Site Map

Home >> Piers and Products >> ECP Steel Piers >> Model 300 Series

ECP Steel Piers™ Model 300 Series

Designed and Engineered to Perform!

ECP Steel Foundation Repair Pier side view

Rated Capacity: 30,000 LBS
*Tested to 64,900 LBS without Failure*

Key Features:
• U.S. Patent Protected • ASTM Certified Material • 3 Control Plates • 70 Square Inch Bearing Surface • No Concrete Required • Portable Equipment • NO SHIMS, NO PINS	• High Strength Galvanized 2-7/8" O.D. Pier Material • 42" Pier Sections with Welded Coupler • Friction Reduction Collar • Installed to Rock or Load Bearing Strata • Engineered Safety Factor of 2:1 • Piers Are Driven Vertically

Bracket Weight: 64 lbs
Gross Weight: 137 lbs (Bracket with pier material)
Bracket Material: A36 Certified Material
Pier Material: 2-7/8" O.D. Galvanized Certified Material

The Model 300 Series pier system exceeds Hydraulic Equipment Manufacturers "Safe Use" capacity. Our design load illustrations are SAFE USE rather than possible unsafe ultimate product capacities.

Typical Design Load	Install To:		Lift/Hold
Model 300 Series	30,000 LBS 5,000 PSI	3:1 10,000 LBS	2.5:1 12,000 LBS	2:1 15,000 LBS

Engineer Tested

Conclusions: "The tests confirm that the pier brackets and drive stands tested have a capacity that is more than 2 times their rated capacity." (30,000 lbs.)